Speed is the absolute value of velocity: speed = .
This is the definition of speed, but hardly enough to be sure students know about speed and its relationship to velocity and acceleration.
Velocity is a vector quantity; that is, it had both a direction and a magnitude. The magnitude of velocity vector is the speed. Speed is a non-negative number and has no direction associated with it.Velocity has a magnitude and a direction. Speed has the same value and units as velocity; speed is a number.
The question that seems to trouble students the most is to determine whether the speed is increasing or decreasing. The short answer is
Speed is increasing when the velocity and acceleration have the same sign.
Speed is decreasing when the velocity and acceleration have different signs.
You should demonstrate this in some real context, such as driving a car (see below). Also you can explain it graphically.
The figure below shows the graph of the velocity (blue graph) of a particle moving on the interval . The red graph is , the speed. The sections where are reflected over the x-axis. (The graphs overlap on [b, d].) It is now quite east to see that the speed is increasing on the intervals [0,a], [b, c] and [d,e].
Another way of approaching the concept is this: the speed is the non-directed length of the vertical segment from the velocity’s graph to the t-axis. Picture the segment shown moving across the graph. When it is getting longer (either above or below the t-axis) the speed is increasing.
Thinking of the speed as the non-directed distance from the velocity to the axis makes answering the two questions below easy:
- What are the values of t at which the speed obtains its (local) maximum values? Answer: x = a, c, and e.
- When do the minimum speeds occur? What are they? Answer: the speed is zero at b and d
Students often benefit from a verbal explanation of all this. Picture a car moving along a road going forwards (in the positive direction) its velocity is positive.
- If you step on the gas your, acceleration pulls you in the direction you are moving and your speed increases. (v > 0, a > 0, speed increases)
- Going too fast is not good, so you put on your breaks, you now accelerate in the opposite direction (decelerate?), but you are still moving forward, but slower. (v > 0, a < 0, speed decreases)
- Finally you stop. Then you shift into reverse and start moving backwards (negative velocity) and you push on the gas to accelerate in the negative direction, so your speed increases. (v < 0, a < 0, speed increases)
- Then you put on the breaks (accelerate in the positive direction) and your speed decreases again. (v < 0, a > 0, speed decreases)
Here is an activity that will help your students discover this relationship. Give Part 1 to half the class and Part 2 to the other half. Part 3 (on the back of Part 1 and Part 2) is the same for both groups. – Added 12-19-17
Also see: A Note on Speed for the purely analytic approach.
Update: “A Note on Speed” added 4-21-2018